zhangjiagang aquatrin Machinery co.,ltd
Zhangjiagang Aquatrin Machinery Co.,LTD
Add to Cart
2.The machine is used in filling mineral water and purified water in bottles made of polyester and plastics. The machine can also be used in hot filling if being installed with temperature controlling device. The handle of the machine can be freely and conveniently turned to adjust the machine to fill various types of bottles.
3.The filling operation is faster and more stable because the micro pressure filling operation of the new type is adopted. There the output and benefit of the machine is higher than the machinery of the same specifications.
4.The advanced OMRON programmed controller (PLC) is adopted to control the machine to run automatically while a transducer is used in the bottle -entering chains to adjust speeds and coordinated with the transducer of the main machine to make the operations of moving bottle forward steadily and reliably.
5.It is convenient to operate with higher automation because every part of the machine is inspected to run with photo electricity, On the bases, the filling parts of the machine can be changed into filling methods of lower vacuum.
| Application | Non-carbonated drink water,such as mineral/pure water,spring/nature water | ||
| Model | CGFA12-12-6 ( Washer: 12; Filler: 12; Capper: 6) | ||
| Capacity | 4000Bottles per hour/500ML PET bottle | ||
| Bottle Material | PET/Plastic bottle | ||
| Bottle Shape | Square/Round bottle | ||
| Bottle height | 150-340mm | ||
| Bottle diameter | φ50-110 | ||
| Cap type | Plastic screw cap , 28 or 30 mm | ||
| Suitable bottle volume | 200-2000ml | ||
| User Ambient Conditions | Temperature:10~40℃;Humidity:No dew | ||
| User Ambient Conditions | Voltage:220V,380V,3phase;Frequency:50HZ/60HZ or your requirement | ||